Processing...
Get clear, menu-based pricing before work begins--giving you more control to fit your needs and budget.
Highly-trained & experienced Electricians. Fully vetted and background-checked. Ready to exceed your expectations.
Serving SWFL customers for 13+ years. Licensed and Insured throughout Florida.
EC13004475. EC13012422.
Your electrical panel is the quiet workhorse of your home. It doesn’t buzz for attention. It doesn’t blink or glow. Most people only notice it when something goes wrong—breakers tripping, lights dimming, appliances acting strange, or an insurance company asking uncomfortable questions.
We perform electrical panel replacement in Bonita Springs every week, and almost every job starts with the same realization from the homeowner: “I didn’t know how much everything depended on that box.”
We’re Coharbor Electric, and we work throughout Bonita Springs replacing aging, undersized, corroded, or unsafe electrical panels in homes and light commercial properties. From older houses near Downtown Bonita Springs and Old 41, to newer developments east of I-75, to coastal properties west of US-41, we’ve seen firsthand how Florida’s climate and growth patterns affect electrical systems over time.
Panel replacement isn’t about upgrading for the sake of it. It’s about safety, reliability, and making sure your home can actually support the way you live today.
Bonita Springs is hard on electrical systems. High humidity, frequent lightning, salt air near the coast, and long cooling seasons all put extra strain on panels and breakers. Add in Florida’s rapid development over the last few decades, and you end up with a wide range of panel types and ages—sometimes within the same neighborhood.
We regularly find older panels near Bonita Grande Drive, Old 41, and Downtown that were installed when homes had far fewer electrical demands. No electric vehicles. No pool equipment. No high-efficiency HVAC systems running year-round. Those panels weren’t built for today’s loads.
Closer to Bonita Beach Road and west of US-41, corrosion becomes a real concern. Salt air works its way into enclosures, breaker connections weaken, and failure happens quietly. In newer homes east of I-75, the issue is often capacity—builders met minimum requirements, but homeowners quickly outgrow them.
Electrical panel replacement matters in Bonita Springs because this is a storm-prone, high-demand environment. A weak panel doesn’t just inconvenience you. It increases the risk of outages, equipment damage, and electrical fires.
Electrical panel replacement is one of the most important upgrades you can make to a home. It’s also one that needs to be done carefully and correctly.
Our electrical panel replacement services in Bonita Springs include:
Evaluation of existing electrical panels and service equipment
Replacement of outdated, damaged, or unsafe panels
Upgrading service capacity to support modern electrical loads
Replacement of problematic breaker brands
Correction of improper wiring inside panels
Installation of new main breakers and branch breakers
Grounding and bonding system upgrades as required
Coordination with the utility company for service disconnect/reconnect
Permitting and inspection through Lee County
Labeling and documentation for clarity and future service
Panel replacement does require a permit in Bonita Springs and Lee County. We handle the entire process—from paperwork to inspections—so homeowners don’t have to navigate it themselves.
Our approach is straightforward. We evaluate what you have, explain what’s not working or no longer safe, and walk you through your options without pressure or confusion.
Certain panel-related problems show up again and again in Bonita Springs.
Outdated electrical panels in older neighborhoods near Downtown Bonita Springs.
Corrosion inside panels in homes west of US-41 due to salt air exposure.
Insufficient amperage for modern appliances, pool equipment, and HVAC systems.
Frequent breaker tripping caused by overloaded or failing breakers.
Loose or overheated connections inside aging panels.
Improper modifications from past remodels or DIY work.
Obsolete breaker brands that are no longer supported or considered safe.
Insurance red flags that lead to policy cancellations or premium increases.
Most homeowners don’t open their panels regularly—and they shouldn’t. That’s why these problems often go unnoticed until something forces the issue.
Panel replacement is not a “swap it out and go” job. It requires planning, coordination, and careful execution.
1. Initial Assessment
We inspect your existing panel, service size, grounding, and overall electrical demand. Many homes in Bonita Springs still rely on older 100-amp services that struggle under modern use.
2. Location & Equipment Review
We evaluate the panel location, clearances, and mounting. Coastal properties often need additional protection considerations.
3. Load Evaluation
We calculate current and future electrical needs—HVAC, pool equipment, EV chargers, generators, and more.
4. Panel Replacement
We coordinate the utility disconnect, replace the panel, install new breakers, and correct wiring issues.
5. Safety & Testing
Every circuit is tested. Grounding and bonding are verified. No guessing.
6. Walk-Through with the Homeowner
We label circuits, explain the new setup, and answer questions before restoring power.
The goal is not just a new panel—it’s a safer, clearer, and more reliable system.
Electrical panel needs vary significantly across Bonita Springs.
Downtown Bonita Springs – Older homes with original panels and wiring.
Bonita Beach Road Corridor – Mixed-age construction with frequent remodels.
Imperial Parkway Area – Newer homes often nearing capacity limits.
West of US-41 – Coastal corrosion affecting panels and service equipment.
East Bonita / Logan Boulevard – Rapid development with builder-grade panels.
Nearby Estero – Similar panel capacity and climate-related challenges.
We tailor panel replacements based on location, home age, and electrical demand—not a one-size-fits-all solution.
We recently worked with a homeowner near Old 41 who kept dealing with tripped breakers every time the air conditioning and dryer ran together. They’d lived with it for years, assuming it was “just how the house was.”
When we inspected the panel, it was clear the system was undersized and showing heat damage. The breakers were original, and corrosion had already started.
We replaced the panel, upgraded the service, corrected grounding, and reorganized the circuits. When power came back on, the homeowner said, “Everything just feels steadier now.” That’s a common reaction—because stability is what a good panel provides.
Do I need a permit for panel replacement?
Yes. Electrical panel replacement requires a permit and inspection.
How long does replacement take?
Typically one full day, depending on complexity.
Can older homes be upgraded safely?
Absolutely. We do it all the time.
Is coastal exposure really that hard on panels?
Yes. Salt air accelerates corrosion inside enclosures.
Will this help with insurance issues?
In many cases, yes. Updated panels are often required.
Can I upgrade for future needs like EV charging?
Yes. We plan for future demand.
Will my power be off all day?
Usually for several hours during the replacement.
We understand Bonita Springs homes—their age, their construction styles, and the electrical demands placed on them. We know local code requirements, storm considerations, and how to build systems that last in Florida conditions.
We communicate clearly, work cleanly, and take safety seriously. No rushed work. No unexplained decisions. Just solid electrical craftsmanship.
If your panel is outdated, overloaded, or raising questions from your insurance company, it’s time to have it evaluated. Reach out to Coharbor Electric today. We proudly serve Bonita Springs and surrounding areas with professional electrical panel replacement you can trust. Let’s make sure the heart of your electrical system is ready for whatever comes next.
SERVICE AREA
Serving Southwest Florida including: Fort Myers, Naples, Cape Coral, and more...
At Coharbor Electric, this is what to expect when entrusting us with fixing your electrical issues.
The first step is to get all the information we will need so that we can correctly assess the problem or situation. The photos or videos you send will be sent directly to the electrician.
Once our electrician has the info he needs, we will dispatch one in the next available spot–armed with expertise, equipment, and the parts he’ll most likely need.
Our Promise is to to You is to perform the job completely, efficiently, and to the Florida electrical code standards. We are committed to fair and honest pricing.
We offer flat rate pricing for service calls, so you always know the price up front. Simple to understand. Flat-rate fixed price so you can be confident you’ll get what paid for.
As a Florida homeowner, you have an endless list of choices for electrical contractors to hire…some great, some good, some bad.
At Coharbor Electric, our benchmark is to be “great”. If you decide to hire us for your electrical service, here’s what you can expect from our electricians: