Processing...
Get clear, menu-based pricing before work begins--giving you more control to fit your needs and budget.
Highly-trained & experienced Electricians. Fully vetted and background-checked. Ready to exceed your expectations.
Serving SWFL customers for 13+ years. Licensed and Insured throughout Florida.
EC13004475. EC13012422.
Running a business on Sanibel isn’t like running one on the mainland. The island’s beautiful — no question — but the environment is tough on buildings, especially electrical systems. Salt air, humidity, storms, seasonal traffic swings… it all adds up.
We provide commercial electrical maintenance in Sanibel for retail shops along Periwinkle Way, restaurants near Tarpon Bay Road, offices around Palm Ridge Road, and marina properties close to the Sanibel Causeway. Some of these buildings are newer rebuilds. Others have been standing for decades.
Either way, one thing’s consistent: if you don’t maintain your electrical system here, it will eventually fail. And it usually fails at the worst possible time — middle of tourist season, Friday night dinner rush, or right before a holiday weekend.
We help business owners stay ahead of that.
Not with guesswork. Not with “we’ll look at it if something breaks.” With real, scheduled, hands-on maintenance built around coastal Florida conditions.
Sanibel’s environment is hard on electrical equipment. Period.
Salt travels in the air. It settles into panels, disconnects, fixtures, conduits. Over time, corrosion builds up on lugs, breaker terminals, grounding bars. Connections loosen. Resistance increases. Heat builds. That’s when problems start.
Then there’s storm season. Businesses along West Gulf Drive or near Bowman’s Beach take serious wind and rain exposure. Even properties closer to Jerry’s Plaza or the East End feel the impact when systems cycle hard before and after storms.
And let’s not forget seasonal demand. During peak months, restaurants and retail spaces on Periwinkle Way run longer hours. HVAC systems push harder. Kitchen equipment stays on all day. Outdoor lighting runs late.
Electrical systems here don’t just sit quietly in the background. They work.
Maintenance keeps small issues from turning into emergency shutdowns.
In a tourist-driven town like Sanibel, downtime costs money — fast.
Commercial electrical maintenance isn’t just “checking a panel.” It’s a structured process.
Here’s what we typically include:
Full panel inspections (main and subpanels)
Tightening and torque-checking breaker connections
Thermal scanning to detect hot spots
Inspecting grounding and bonding systems
Testing GFCI and AFCI protection where required
Checking surge protection devices
Inspecting service disconnects and meter bases
Evaluating exterior lighting and signage circuits
Inspecting generator systems and transfer switches
Testing emergency lighting and exit signs
Reviewing load balance across phases
Inspecting marina or dock electrical components (where applicable)
In Sanibel, commercial maintenance doesn’t usually require new permits unless upgrades or replacements are needed. But everything we inspect must comply with NEC standards and Lee County requirements.
If we find something unsafe or out of code, we’ll explain it clearly. No scare tactics. Just straight information about what’s happening and what it means for your business.
We document what we see. We track changes over time. Maintenance isn’t random — it’s consistent.
After years on the island, certain patterns show up again and again.
Here’s what we commonly find:
1. Corroded Breaker Connections
Especially in buildings near the Gulf or Bay. Salt intrusion causes gradual corrosion inside panels. It’s not always visible until we open things up.
2. Loose Lugs from Heat Cycling
Restaurants along Periwinkle that run heavy kitchen loads often develop loose feeder connections over time. Heat expands metal. Cooling contracts it. Connections loosen.
3. Faded or Illegible Panel Labels
Older strip centers near Palm Ridge Road often have panels with handwritten labels from 20 years ago. That becomes a problem during emergencies.
4. Failing Surge Protection
Many systems took hits during past storm seasons. Surge devices wear out — and most owners don’t realize they’re no longer functioning.
5. Exterior Lighting Corrosion
Fixtures along West Gulf Drive rust faster. Improperly rated hardware deteriorates quickly.
6. Generator Systems That Haven’t Been Tested
Backup systems installed after major storms sometimes go untouched for years. Batteries fail. Transfer switches stick.
7. Marina Pedestal Deterioration
Near the Sanibel Marina, we often see worn or compromised dock power systems due to constant moisture exposure.
8. Overloaded Circuits After Renovations
A business expands seating, adds refrigeration, upgrades signage — but the electrical load isn’t recalculated properly.
These aren’t dramatic, headline-making problems. They’re slow-burn issues. And those are the ones maintenance is meant to catch.
We follow a consistent approach on every Sanibel property.
1. Initial Assessment
We sit down with you. How’s the building been performing? Any flickering lights? Breaker trips? Storm-related concerns?
2. Location & Environmental Review
Properties near the Causeway or West Gulf often require additional corrosion checks. Marina-adjacent buildings need moisture-focused inspections.
3. Load Evaluation
We review current usage versus system capacity. Many older Sanibel buildings weren’t built for modern electrical demands.
4. Hands-On Inspection & Service
We open panels. Torque connections. Clean minor corrosion where safe. Replace worn components if needed. Test protective devices.
5. Safety Testing
We check voltage levels, confirm grounding integrity, verify phase balance, and test backup systems.
6. Walk-Through with You
We explain what we found. What’s solid. What may need attention soon. What’s urgent.
We don’t overwhelm you with technical talk. Just clear information so you can make informed decisions.
And we schedule follow-ups. Maintenance only works if it’s consistent.
We provide commercial maintenance throughout:
Periwinkle Way corridor
Jerry’s Plaza area
Tarpon Bay Road
Palm Ridge Road
West Gulf Drive
Sanibel Marina area
East End near the Causeway
Different areas bring different challenges.
Retail along Periwinkle sees heavy seasonal usage.
Gulf-side properties deal with salt corrosion.
Marina businesses face constant moisture exposure.
Older buildings inland may have aging panels that need closer monitoring.
Sanibel may be small geographically, but electrically? It varies.
We had a small retail shop near Jerry’s Plaza call us before peak season.
“No major problems,” the owner said. “Just want to make sure we’re good before things get busy.”
That’s the kind of call we like.
During inspection, we found slight overheating on one breaker feeding their lighting circuits. Nothing dramatic yet — but the lug connection was loose and showing early discoloration.
We tightened it to proper torque, cleaned minor corrosion on the grounding bar, and replaced a surge device that had clearly taken a hit in a past storm.
Owner looked at the thermal scan image and said, “That could’ve shut us down mid-season, couldn’t it?”
Yep. It could have.
Instead, it didn’t.
That’s what maintenance is about.
How often should commercial systems be inspected?
At least annually in coastal environments like Sanibel. High-load businesses may benefit from twice-yearly checks.
Do I need a permit for maintenance?
Routine inspections don’t require permits. Replacements or upgrades typically do.
Is maintenance really necessary if nothing seems wrong?
Yes. Most electrical failures build slowly. Maintenance catches issues early.
Does salt air really affect interior panels?
Absolutely. Salt travels. Even inland properties see corrosion over time.
What about storm preparation?
We recommend pre-season inspections before hurricane season begins.
Can maintenance reduce insurance risks?
In many cases, yes. Proper documentation of electrical inspections can support insurance compliance.
We know this island.
We understand how Gulf exposure affects metal.
We understand Lee County code requirements.
We understand the seasonal rhythm of Sanibel businesses.
We don’t rush inspections.
We don’t ignore “minor” issues.
We don’t oversell repairs you don’t need.
We show you what we see. We explain it clearly. We document everything.
Commercial electrical systems aren’t something you think about every day — until they fail.
Our job is to keep that from happening.
If you own or manage a commercial property in Sanibel, proactive electrical maintenance isn’t optional — it’s smart business.
Coharbor Electric provides dependable commercial electrical maintenance throughout Sanibel and surrounding areas, built specifically for Florida’s coastal conditions.
Reach out today. Let’s keep your business powered, protected, and prepared year-round.
SERVICE AREA
Serving Southwest Florida including: Fort Myers, Naples, Cape Coral, and more...
At Coharbor Electric, this is what to expect when entrusting us with fixing your electrical issues.
The first step is to get all the information we will need so that we can correctly assess the problem or situation. The photos or videos you send will be sent directly to the electrician.
Once our electrician has the info he needs, we will dispatch one in the next available spot–armed with expertise, equipment, and the parts he’ll most likely need.
Our Promise is to to You is to perform the job completely, efficiently, and to the Florida electrical code standards. We are committed to fair and honest pricing.
We offer flat rate pricing for service calls, so you always know the price up front. Simple to understand. Flat-rate fixed price so you can be confident you’ll get what paid for.
As a Florida homeowner, you have an endless list of choices for electrical contractors to hire…some great, some good, some bad.
At Coharbor Electric, our benchmark is to be “great”. If you decide to hire us for your electrical service, here’s what you can expect from our electricians: