Processing...
Get clear, menu-based pricing before work begins--giving you more control to fit your needs and budget.
Highly-trained & experienced Electricians. Fully vetted and background-checked. Ready to exceed your expectations.
Serving SWFL customers for 13+ years. Licensed and Insured throughout Florida.
EC13004475. EC13012422.
If you’ve got an EV in Punta Gorda—or you’re planning to get one—you already know the convenience of charging at home makes a huge difference. No waiting around at public stations, no planning your day around charging stops. Just plug in when you get home and you’re good to go.
We install EV chargers throughout Punta Gorda, from waterfront homes in Punta Gorda Isles to newer properties in Deep Creek and established neighborhoods like Burnt Store Isles. And the reality is, every home is a little different. Some are ready for a charger right away. Others need upgrades behind the scenes before everything works the way it should.
Around here, between the heat, humidity, and how much power homes are already using, EV charger installation isn’t always as simple as mounting a unit on the wall. It has to be done right—or it won’t perform the way you expect.
EVs are becoming more common across Punta Gorda, and with that comes a shift in how homes use electricity.
Start with lifestyle. Most homeowners here already have high electrical demand—AC systems running year-round, pool pumps, outdoor lighting, sometimes boat lifts. In neighborhoods like Punta Gorda Isles or Burnt Store Isles, it’s not unusual for homes to already be pushing their electrical systems pretty hard.
Now add an EV charger into the mix. That’s a significant load, especially for Level 2 chargers. If the system isn’t prepared for it, you’ll run into issues—tripping breakers, slow charging, or worse.
Then there’s the environment. Heat and humidity affect equipment over time, especially if chargers are installed in garages, outdoors, or near the coast. Homes near Charlotte Harbor or canal systems deal with salt air, which can impact connections and hardware if it’s not installed properly.
And storms? They’re part of life here. Power surges and outages can affect charging equipment just like anything else in your home.
So installing an EV charger in Punta Gorda isn’t just about plugging in—it’s about making sure your electrical system can support it safely and reliably.
EV charger installation involves more than just mounting a unit. We’re looking at your entire electrical system to make sure everything works together.
Here’s what we typically handle:
Evaluating your electrical panel and service capacity
Determining the best location for the charger (garage, exterior wall, etc.)
Installing Level 2 EV chargers (Tesla Wall Connector and other brands)
Running new dedicated circuits for the charger
Upgrading panels or service if needed
Installing proper breakers and disconnects
Ensuring proper grounding and bonding
Setting up surge protection (highly recommended in Punta Gorda)
Coordinating permits and inspections through Charlotte County
Yes—permits are required for EV charger installation here. We handle that entire process so you don’t have to deal with it.
We also make sure everything is installed to current code and manufacturer specifications. That’s important—not just for safety, but for performance and warranty protection.
We’ve installed EV chargers all over Punta Gorda, and certain challenges come up more than others.
1. Panels Without Enough Capacity
Common in older homes near the Historic District—systems weren’t designed for EV charging loads.
2. Full Panels With No Space for New Circuits
We open the panel and there’s simply nowhere to add a breaker.
3. Undersized Electrical Service
100-amp service struggling to support modern loads plus an EV charger.
4. Long Distance From Panel to Charger Location
Especially in larger homes or detached garages—requires more planning and wiring.
5. Outdoor Installation Challenges
Heat, humidity, and salt air—especially in Punta Gorda Isles—require proper equipment and protection.
6. No Surge Protection
A big one here. EV chargers are sensitive equipment, and storms are common.
7. Existing Wiring Not Up to Code
Older wiring systems that need upgrades before a charger can be safely installed.
8. DIY Install Attempts
We’ve seen a few—and they usually need to be corrected.
We keep the process straightforward, but we don’t cut corners.
1. Initial Assessment
We look at your panel, your home layout, and your charger type. We’ll ask how you plan to use it—daily charging, occasional use, etc.
2. Location & Equipment Review
We determine the best spot for the charger. In Punta Gorda, garages and shaded areas are preferred, but we also install outdoor units when needed.
3. Load Evaluation
We calculate your home’s electrical load. Many homes here are already near capacity, so this step matters.
4. Installation
We run the necessary wiring, install the charger, and connect everything to the panel. Clean, organized, and up to code.
5. Safety & Testing
We test the charger under load, check connections, and make sure everything is functioning properly.
6. Walk-Through
We show you how to use it, answer questions, and make sure you’re comfortable with everything.
Quick note—homes near Charlotte Harbor or canal systems often require extra care for outdoor installations due to corrosion and moisture exposure.
We install EV chargers throughout Punta Gorda, and each neighborhood brings something different.
Punta Gorda Isles – Waterfront exposure means extra protection for outdoor installations.
Burnt Store Isles – Larger homes with higher electrical demand—panel upgrades are common.
Deep Creek – Newer homes, but we still check capacity carefully.
Historic District – Older electrical systems often need upgrades before installation.
Downtown Punta Gorda – Tight layouts and older infrastructure.
Port Charlotte (nearby) – Similar conditions, especially with aging systems.
We tailor each installation based on the home and location.
We had a homeowner in Punta Gorda Isles who had just bought a Tesla and wanted a charger installed in the garage.
They said, “I figured this would be a quick install… but I wanted to make sure it’s done right.”
Good call.
We checked the panel—already close to capacity with AC, pool equipment, and other loads. No room for a new circuit without adjustments.
We walked them through it, upgraded the panel to handle the additional load, and installed the Tesla Wall Connector in the garage.
Once everything was up and running, they plugged in the car and watched it start charging.
They looked over and said, “Yeah… this beats driving to a charging station.”
That’s usually the moment it clicks.
Do I need a permit for EV charger installation?
Yes. Permits and inspections are required through Charlotte County.
Can my current panel handle an EV charger?
Maybe. We’ll evaluate your system and let you know if upgrades are needed.
Is a Level 2 charger worth it?
For most homeowners, yes. It’s significantly faster than standard charging.
Can chargers be installed outdoors?
Yes, but they need to be properly rated and installed for Punta Gorda’s conditions.
Does the coastal environment affect EV chargers?
It can. Salt air and humidity require proper installation and protection.
How long does installation take?
Most installations are completed in a day, depending on complexity.
Should I install surge protection?
We strongly recommend it, especially in Southwest Florida.
We’ve installed EV chargers across Punta Gorda, and we understand what it takes to do it right in this environment.
We don’t just install the charger—we make sure your entire system can support it safely.
Experience with Punta Gorda homes and electrical systems
Knowledge of local code and permitting requirements
Familiar with coastal conditions and storm-related risks
Clean, professional installations
Honest recommendations—no guesswork
We treat every installation like it matters—because it does.
If you’re ready to install an EV charger—or just want to know what your home needs to support one—let’s take a look.
Reach out to Coharbor Electric. We serve Punta Gorda and surrounding areas, and we’ll help you get set up with a charging solution that’s safe, reliable, and built for the way you live.
SERVICE AREA
Serving Southwest Florida including: Fort Myers, Naples, Cape Coral, and more...
At Coharbor Electric, this is what to expect when entrusting us with fixing your electrical issues.
The first step is to get all the information we will need so that we can correctly assess the problem or situation. The photos or videos you send will be sent directly to the electrician.
Once our electrician has the info he needs, we will dispatch one in the next available spot–armed with expertise, equipment, and the parts he’ll most likely need.
Our Promise is to to You is to perform the job completely, efficiently, and to the Florida electrical code standards. We are committed to fair and honest pricing.
We offer flat rate pricing for service calls, so you always know the price up front. Simple to understand. Flat-rate fixed price so you can be confident you’ll get what paid for.
As a Florida homeowner, you have an endless list of choices for electrical contractors to hire…some great, some good, some bad.
At Coharbor Electric, our benchmark is to be “great”. If you decide to hire us for your electrical service, here’s what you can expect from our electricians: