Processing...
Get clear, menu-based pricing before work begins--giving you more control to fit your needs and budget.
Highly-trained & experienced Electricians. Fully vetted and background-checked. Ready to exceed your expectations.
Serving SWFL customers for 13+ years. Licensed and Insured throughout Florida.
EC13004475. EC13012422.
If you’ve lived in Punta Gorda for any length of time, you’ve probably seen what a lightning storm can do. One minute everything’s fine… next thing you know, lights flicker, power drops, and suddenly half the electronics in the house aren’t working right.
We get calls like that all the time—from homes in Punta Gorda Isles, Burnt Store Isles, even newer builds out in Deep Creek. And the story is usually the same: “We had a surge, and now things are acting weird.”
That’s the thing about electrical surges—they don’t always completely destroy equipment. Sometimes they just weaken it. Shorten the lifespan. Cause problems that show up weeks later.
At Coharbor Electric, we install whole house surge protectors to stop that damage at the source—right at your electrical panel. It’s one of those upgrades people don’t think about… until they wish they had it.
Florida is one of the lightning capitals of the country, and Punta Gorda sits right in the middle of that reality.
During storm season, especially around areas like Marion Avenue or near Charlotte Harbor, lightning strikes and grid fluctuations are just part of daily life. Even if your home doesn’t take a direct hit, nearby strikes can send voltage spikes through the power lines.
And it’s not just lightning.
We also see surges from:
Now combine that with modern homes filled with electronics—TVs, smart home systems, appliances, chargers—and you’ve got a lot of sensitive equipment at risk.
In neighborhoods like Punta Gorda Isles or Seminole Lakes, where homes often sit empty for part of the year, a surge can hit and nobody’s there to catch it.
A whole house surge protector gives you a layer of protection that plug-in strips just can’t match.
A whole house surge protector is installed directly at your electrical panel. It acts like a gatekeeper—blocking or diverting excess voltage before it can travel through your home’s wiring.
Here’s what we handle:
We also make sure everything meets Punta Gorda and Charlotte County code requirements.
And here’s something a lot of people don’t realize—surge protectors only work as well as the grounding system behind them. So we always check that too.
We keep the process straightforward. No overcomplication. Just solid protection where it counts.
Surge-related problems show up in ways people don’t always connect back to electrical issues. Here’s what we commonly see:
These issues can get expensive fast—and most of them are preventable.
We take a no-nonsense approach to surge protection—because it’s all about reliability.
1. Initial Assessment
We start by looking at your panel, your home’s layout, and any history of surge issues.
2. Equipment Review
We determine the right type of surge protector for your system. Not all homes need the same setup.
3. System & Grounding Evaluation
We check your panel capacity and grounding system. Many homes in Punta Gorda—especially older ones—need updates here.
4. Installation
We install the surge protector directly at the panel, making secure, code-compliant connections.
5. Safety & Testing
We verify proper operation and ensure everything is grounded correctly.
6. Walk-Through
We explain how the system works, what it protects, and what to expect over time.
And we’ll be honest with you—if your panel or grounding system needs work first, we’ll tell you upfront.
We install whole house surge protection across all areas of Punta Gorda, and each one has its own considerations.
No matter the neighborhood, the goal is the same—protect your entire electrical system.
We had a call from a homeowner in Punta Gorda Isles after a storm rolled through.
He said, “The AC stopped working, the TV won’t turn on, and a few outlets aren’t right. I don’t know what happened.”
We checked it out—classic surge damage. No whole house protection, just a couple of power strips.
We replaced the damaged components, installed a whole house surge protector at the panel, and made sure the grounding system was solid.
Before we left, he asked, “So this won’t happen again?”
We told him, “We can’t stop the storms—but we can stop most of the damage.”
That’s the point.
Do I need a permit for surge protector installation in Punta Gorda?
In many cases, yes—especially for panel work. We handle all permitting as needed.
Will this protect everything in my home?
It provides strong protection at the panel, but some sensitive electronics may still benefit from additional point-of-use protection.
How long does installation take?
Most installations can be completed in a few hours.
Can older panels support surge protectors?
Sometimes. If not, we’ll recommend safe upgrade options.
Is this really necessary if I have power strips?
Yes. Power strips don’t stop large surges coming from outside your home.
How long do surge protectors last?
They can last several years, but performance can degrade after major surges.
Does this help with lightning strikes?
It helps protect against indirect lightning surges, which are the most common.
We’ve seen what surges can do in Punta Gorda—and we know how to prevent that damage.
We understand local conditions, from lightning storms to power fluctuations. We know the electrical systems in these homes, and we install protection that actually works in real-world conditions.
We don’t cut corners. We don’t oversell. We just do the job right.
Clean work, solid installations, and straightforward explanations—that’s how we operate at Coharbor Electric.
If you’ve ever lost electronics after a storm—or just want to avoid that headache altogether—now’s the time to install whole house surge protection.
It’s a small upgrade that can save you a lot of money and stress down the line.
Reach out to Coharbor Electric today for whole house surge protector installation in Punta Gorda and surrounding areas. Let’s protect your home before the next storm rolls in.
SERVICE AREA
Serving Southwest Florida including: Fort Myers, Naples, Cape Coral, and more...
At Coharbor Electric, this is what to expect when entrusting us with fixing your electrical issues.
The first step is to get all the information we will need so that we can correctly assess the problem or situation. The photos or videos you send will be sent directly to the electrician.
Once our electrician has the info he needs, we will dispatch one in the next available spot–armed with expertise, equipment, and the parts he’ll most likely need.
Our Promise is to to You is to perform the job completely, efficiently, and to the Florida electrical code standards. We are committed to fair and honest pricing.
We offer flat rate pricing for service calls, so you always know the price up front. Simple to understand. Flat-rate fixed price so you can be confident you’ll get what paid for.
As a Florida homeowner, you have an endless list of choices for electrical contractors to hire…some great, some good, some bad.
At Coharbor Electric, our benchmark is to be “great”. If you decide to hire us for your electrical service, here’s what you can expect from our electricians: