Processing...
Get clear, menu-based pricing before work begins--giving you more control to fit your needs and budget.
Highly-trained & experienced Electricians. Fully vetted and background-checked. Ready to exceed your expectations.
Serving SWFL customers for 13+ years. Licensed and Insured throughout Florida.
EC13004475. EC13012422.
If you’ve lived in Sarasota for a while, you know how much modern life depends on reliable electricity. From air conditioners running full blast during the summer heat to pool pumps, smart home systems, EV chargers, and home offices—today’s homes simply demand more power than they did even twenty years ago.
That’s where electrical panel replacement comes in.
We provide professional electrical panel replacement in Sarasota for homeowners and businesses who need safer, stronger, and more reliable electrical systems. Whether you’re in a classic bungalow in Laurel Park, a waterfront property near Siesta Key, or a newer development out east near Lakewood Ranch, your electrical panel plays a huge role in keeping everything running smoothly.
Sarasota presents some unique electrical challenges. Between the humidity, coastal air, seasonal storms, and a mix of older homes and modern construction, we see a wide range of panel conditions. Some homes still operate with outdated fuse boxes or early breaker panels that simply weren’t built for the electrical loads we use today.
Our job is simple: upgrade your system safely, bring everything up to code, and give your property the electrical backbone it needs for modern living.
Electrical panel replacement is one of the most important upgrades a Sarasota property owner can make—especially in older neighborhoods where many homes were built decades ago.
Take areas like Arlington Park, Southgate, and parts of Gulf Gate Estates. These communities have beautiful homes, but many of the original electrical panels were installed when households used far fewer appliances.
Back then, homes didn’t have:
Electric vehicle chargers
Multiple refrigerators or freezers
Large pool equipment systems
High-powered HVAC systems
Home offices with servers and electronics
When all those loads get added over time, the electrical panel becomes overloaded.
We see this regularly in homes along Bee Ridge Road, Tuttle Avenue, and Fruitville Road. Breakers start tripping more often, circuits become unbalanced, and sometimes panels develop overheating issues.
Another factor here in Sarasota is storm activity. Lightning and power surges during summer storms can damage older panels, especially if the home lacks a whole-house surge protector.
And near the coast—Siesta Key, Lido Key, and Longboat Key—the salty air can slowly corrode electrical components. Over time, corrosion inside a panel can cause loose connections, which is a serious safety concern.
Replacing the panel ensures the entire electrical system works safely and reliably for years to come.
Electrical panel replacement is more than just swapping out a metal box. It involves evaluating the entire electrical system to make sure it can safely handle your property’s power demands.
When we perform electrical panel replacement in Sarasota, our service typically includes:
Full electrical system evaluation
We start by examining your existing panel, service size, grounding system, and circuit layout. Many homes in Sarasota still run on 100-amp service, which often isn’t enough for modern electrical loads.
Load calculation
Using National Electrical Code (NEC) guidelines, we calculate the electrical demand for your home or building. This determines whether a 150-amp or 200-amp panel is appropriate.
Panel replacement or upgrade
We install a modern breaker panel designed for today’s electrical systems. These panels provide improved safety features, better load distribution, and room for additional circuits.
Circuit organization
Older panels can become messy over time. During replacement, we properly label and organize circuits so everything is clear and accessible.
Grounding and bonding inspection
Proper grounding is critical in Florida, especially during storms. We inspect grounding rods, bonding connections, and service equipment to ensure everything meets code.
Permits and inspections
Electrical panel replacement in Sarasota typically requires permits through Sarasota County or the City of Sarasota. We handle the permitting process and ensure the installation passes inspection.
Our goal is to leave your electrical system safer, cleaner, and fully compliant with modern electrical standards.
Over the years, we’ve replaced a lot of electrical panels throughout Sarasota. Certain issues show up again and again depending on the neighborhood and age of the property.
Here are some of the most common problems we encounter.
Outdated fuse boxes in older homes
Some historic homes near Laurel Park and Gillespie Park still have fuse boxes. These systems weren’t designed for modern electrical loads and can become unsafe if overloaded.
Panels with no available breaker space
In areas like Palmer Ranch and Gulf Gate Estates, homeowners often add new appliances, pool heaters, or EV chargers. The original panel simply runs out of breaker capacity.
Frequent breaker tripping
We often hear this from homeowners near Beneva Road or Clark Road. When breakers trip repeatedly, it usually means the panel is overloaded or circuits aren’t balanced properly.
Heat-damaged breakers
Florida heat combined with high electrical demand can cause breakers to overheat. We occasionally open a panel and see discoloration or melted insulation around breaker connections.
Corrosion near coastal areas
Properties on Siesta Key or Longboat Key sometimes show corrosion inside the panel due to salty coastal air.
Improper DIY modifications
We sometimes find homeowners or previous contractors who added circuits without proper permits or wiring methods. Panel replacement gives us a chance to correct those issues.
Panels too small for modern homes
Many Sarasota homes built in the 1980s or earlier still run on 100-amp service, which simply isn’t enough for today’s energy needs.
Replacing an electrical panel is a precise process that requires careful planning and strict adherence to electrical code.
Here’s how we approach every project.
1. Initial assessment
We inspect the existing panel, wiring, service entrance, and grounding system. Many Sarasota homes have older equipment that needs updating.
2. Electrical load evaluation
We calculate the property’s power needs to determine the proper panel size and breaker configuration.
3. Utility coordination
If the service needs upgrading, we coordinate with the local utility provider before the replacement begins.
4. Panel installation
We remove the old panel and install the new one, carefully reconnecting circuits and organizing wiring.
5. Safety checks and testing
Every breaker, circuit, and connection is tested to ensure safe operation.
6. Customer walkthrough
Before we leave, we walk you through the panel layout and explain how everything works.
Many Sarasota homes—especially those built before the 1990s—require additional updates during this process, such as grounding improvements or surge protection installation.
We provide electrical panel replacement throughout Sarasota and surrounding communities.
Some of the areas we frequently serve include:
Siesta Key
Coastal homes here often require corrosion-resistant equipment due to salty air.
Palmer Ranch
Many homes here are reaching the age where electrical upgrades are becoming necessary.
Laurel Park
Historic homes in this area often need complete panel modernization.
Lakewood Ranch area
Newer homes may require panel expansion for EV chargers and smart home systems.
Gulf Gate Estates
We often upgrade panels in mid-century homes that were built before modern electrical demands.
Fruitville Road and Bee Ridge Road corridors
These busy residential and commercial areas frequently see panel upgrades for both homes and small businesses.
Each neighborhood has its own electrical challenges, and our experience working across Sarasota helps us handle them efficiently.
Not long ago, we worked with a homeowner near Arlington Park who had been experiencing constant breaker trips.
The home was built in the early 1970s and still had its original 100-amp electrical panel.
The homeowner told us:
“Every time we run the pool pump and the AC kicks on, something trips.”
When we opened the panel, the issue became obvious. The breakers were packed tightly, several circuits were doubled up, and the wiring had clearly been modified over the years.
We upgraded the home to a modern 200-amp panel, reorganized the circuits, and added whole-house surge protection.
Once everything was finished, the homeowner turned the pool system back on and said with a laugh:
“That’s the first time in months nothing shut off.”
Moments like that are why electrical panel upgrades make such a difference.
Do I need a permit for electrical panel replacement in Sarasota?
Yes. Panel replacement typically requires permits and inspections through Sarasota County or the City of Sarasota.
How long does panel replacement take?
Most panel replacements take between 4 and 8 hours depending on the complexity of the system.
Should I upgrade to 200 amps?
For most Sarasota homes, a 200-amp panel provides enough capacity for modern electrical needs.
Will my power be off during the work?
Yes. Power is usually shut off for several hours during installation.
Can older homes support a panel upgrade?
Absolutely. Older homes often benefit the most from panel replacement.
Is surge protection recommended in Sarasota?
Yes. With frequent lightning storms in Florida, whole-house surge protection is strongly recommended.
Electrical work isn’t something you want done halfway.
When we replace electrical panels in Sarasota, we bring years of hands-on experience working with Florida homes and commercial buildings.
Homeowners choose us because:
We understand Sarasota’s electrical infrastructure
We follow local code and permitting requirements
We design panels for real-world electrical loads
We work cleanly and professionally
We explain everything clearly and honestly
Our focus is simple—safe, reliable electrical systems that last.
If your electrical panel is outdated, overloaded, or showing signs of wear, it may be time for an upgrade.
Coharbor Electric proudly provides electrical panel replacement in Sarasota and surrounding communities. Our team is ready to inspect your system, explain your options, and help you build a safer, more reliable electrical setup for your home or business.
Reach out today to schedule your electrical panel evaluation.
SERVICE AREA
Serving Southwest Florida including: Fort Myers, Naples, Cape Coral, and more...
At Coharbor Electric, this is what to expect when entrusting us with fixing your electrical issues.
The first step is to get all the information we will need so that we can correctly assess the problem or situation. The photos or videos you send will be sent directly to the electrician.
Once our electrician has the info he needs, we will dispatch one in the next available spot–armed with expertise, equipment, and the parts he’ll most likely need.
Our Promise is to to You is to perform the job completely, efficiently, and to the Florida electrical code standards. We are committed to fair and honest pricing.
We offer flat rate pricing for service calls, so you always know the price up front. Simple to understand. Flat-rate fixed price so you can be confident you’ll get what paid for.
As a Florida homeowner, you have an endless list of choices for electrical contractors to hire…some great, some good, some bad.
At Coharbor Electric, our benchmark is to be “great”. If you decide to hire us for your electrical service, here’s what you can expect from our electricians: